study@ubuntu:~/Desktop/hbird-sdk/application/baremetal/helloworld$ sudo vi /etc/udev/rules.d/99-openocd.rules

study@ubuntu:~/Desktop/hbird-sdk/application/baremetal/helloworld$ whoami

study

study@ubuntu:~/Desktop/hbird-sdk/application/baremetal/helloworld$ groups

study adm cdrom sudo dip plugdev lpadmin lxd sambashare

study@ubuntu:~/Desktop/hbird-sdk/application/baremetal/helloworld$ make upload SOC=hbirdv2 BOARD=mcu200t CORE=e203 DOWNLOAD=flash

Download and run helloworld.elf

riscv-nuclei-elf-gdb helloworld.elf -ex "set remotetimeout 240" \

        -ex "target remote | openocd --pipe -f ../../../SoC/hbirdv2/Board/mcu200t/openocd_hbirdv2.cfg" \

        --batch -ex "monitor reset halt" -ex "monitor halt" -ex "monitor flash protect 0 0 last off" -ex "load" -ex "monitor resume" -ex "quit"

sh: 1: openocd: not found

Remote communication error. Target disconnected.: Connection reset by peer.

"monitor" command not supported by this target.

"monitor" command not supported by this target.

"monitor" command not supported by this target.

You can't do that when your target is `exec'

"monitor" command not supported by this target.

study@ubuntu:~/Desktop/hbird-sdk/application/bar